Question 1

What is a dangle earring?

Accepted Answer

Dangle refers to any earring with components that swing or move freely below the earlobe.

Question 2

What is a drop earring?

Accepted Answer

Drop refers to a style where the hanging part of the earring is stationary or only slightly mobile, often featuring a single piece or charm.

Question 3

What are the length ranges of the different length names of earrings?

Accepted Answer

The table below lists the names of lengths listed on the product pages of earrings along with their length ranges, measured from the point where the earring hangs.

Question 4

What is an earring finding?

Accepted Answer

An earring finding refers to the component or part of an earring that enables it to attach to the ear. Findings are the essential hardware pieces used in jewelry-making and can vary depending on the style of the earring. They serve both functional and decorative purposes.

Common Types of Earring Findings:
1. Fishhook/Wire Hook: A curved wire that threads through the pierced ear and is often used for dangle or drop earrings.
2. Post/Stud Back: A straight pin with a backing that secures the earring to the ear, commonly seen in stud earrings.
3. Leverback: A hook with a hinged clasp that snaps shut for added security, often used in high-end or dangling earrings.
4. Clip-On: A finding designed for non-pierced ears that clamps onto the earlobe.
5. Hoop Findings: Circular or semi-circular pieces that form the base of hoop earrings.
6. Chandelier or Drop Base: A decorative base that allows multiple elements or beads to dangle from it.

In summary, an earring finding is the structural element that supports the design and ensures the earring stays securely in place when worn.

Question 5

Do standards or conventions exist to measure jewelry?

Accepted Answer

Yes, there are standards and conventions for measuring earrings, commonly used in the jewelry industry to ensure consistency and clarity when describing or selling earrings. These conventions focus on the dimensions, weight, and other features of the earrings. Here’s a breakdown:

1. Length
Definition: The measurement from the topmost point of the earring (where it connects to the ear, like the post or hook) to the lowest hanging point.
 • Common Units:
		Millimeters (mm): For smaller, precise measurements.
		Inches: Often used for larger or longer earrings.
 • Examples:
		Stud earrings: Typically measured in diameter.
		Drop/dangle earrings: Measured from the top of the hook/post to the bottom of the design.
		Hoops: Measured as the outer diameter of the circular or semi-circular shape.

2. Width
Definition: The horizontal measurement at the widest part of the earring.
 • Common Units: Millimeters or inches.
 • Examples:
		For hoops, this could be the thickness of the band.
		For dangle earrings, this could refer to the widest decorative element.

3. Thickness
Definition: Refers to the thickness of various components, such as the earring post, hook, or decorative elements.
 • Gauge: Used for earring posts or wires. The most common post thickness for standard piercings is 20 gauge (0.8 mm) or 18 gauge (1.0 mm).
 • Millimeters: Used for decorative parts of the earring.

4. Weight
Definition: The total weight of the earring, often given per pair.
 • Grams (g): For most fine jewelry.
 • Carats (ct): Used when gemstones are included.
 • Importance: Heavier earrings may not be suitable for all wearers due to potential discomfort.

5. Style-Specific Measurements
 • Hoops:
		Outer Diameter: The total circular dimension.
		Inner Diameter: Important for fit and comfort.
		Tube Thickness: The thickness of the hoop’s material.
 • Studs:
		Diameter of the front element (e.g., gemstone or decorative piece). 
		Length of the post.
 • Dangle/Drop Earrings:
		Drop Length: From the earlobe to the lowest hanging part.
		Decorative Element Dimensions: If the dangling portion has a specific shape or design.
 • Huggies:
		Diameter: Smaller than traditional hoops, designed to “hug” the earlobe.

Why These Standards Matter
 • Ensures customer clarity when purchasing earrings online or in-store.• Helps avoid miscommunication about size, weight, or fit.
 • Aligns with industry practices for quality control and comparison.By following these conventions, jewelers and retailers provide clear, consistent descriptions for their products.

Question 6

What types of hardware are used in earrings that go through the ear?

Accepted Answer

The types of hardware used in earrings that go through the ear vary based on style, comfort, and functionality. Here’s a comprehensive list of common earring hardware:
1. Posts
 • Description: A straight bar that goes through the ear piercing and is secured with a backing.
 • Butterfly Back (Push Back): A small, metal or plastic clasp that slides onto the post.
 • Screw Back: A threaded post with a backing that screws on for added security.
 • Friction Back: A snug, slide-on backing that holds the earring in place.
 • Common Styles: Stud earrings, solitaire earrings.
2. Hooks
 • Description: A curved wire that threads through the ear without additional backings.
 • Fishhook (Shepherd Hook): A simple, long curve that dangles and stays in place with gravity.
 • French Wire: A slightly thicker, rounded hook with a more secure fit.
3. Hoops
 • Description: Circular or semi-circular earrings that close through the ear piercing.
 • Latch Back: A hinged mechanism that locks into place.
 • Endless Hoop: A seamless design where one end of the hoop inserts into the other.
 • Click-Top Hoop: A post clicks into a small groove for security.
 • Common Styles: Hoop earrings.
4. Lever Backs
 • Description: A hook with a hinged, clasp-like backing that snaps shut behind the ear.
 • Features: Secure and comfortable for all-day wear.
 • Common Styles: Drop earrings, dangle earrings.
5. Threaders
 • Description: Thin chains or wires that are threaded through the ear, often with a decorative piece on one or both ends.
 • Features: Minimalist and lightweight.
 • Common Styles: Modern, delicate earrings.
6. Huggie Clasps
 • Description: Small hoops that “hug” the earlobe, often with a hinge mechanism.
 • Features: Compact and secure, ideal for smaller earrings.
 • Common Styles: Huggie earrings, small hoops.
7. Stud Bars or Straight Pins
 • Description: A straight pin that goes through the ear and is held in place by a decorative element on one end and a removable piece on the other.
 • Common Styles: Bar earrings, minimalist studs.
8. Ball Backs
 • Description: A post secured with a spherical backing for a polished look.
 • Features: Common in both stud and drop earrings.
9. Screw-On Clips (For Pierced Ears)
 • Description: A post with a small screw-on disk that tightens to hold the earring in place.
 • Features: Adjustable for comfort and security.
10. Specialty Clasps
 • Magnetic Backs: Used for lightweight earrings with a magnetic piece behind the ear.
 • Ear Climbers: Hardware that starts as a post but follows the curve of the ear with additional support.

These hardware types provide various levels of comfort, security, and style to accommodate different preferences and earring designs.

Question 7

What are the decorations on the stems of earrings called?

Accepted Answer

When you add something to the stem of an earring to decorate it, the decoration is typically referred to as a “bead cap,” “dangle,” “charm,” or “embellishment,” depending on the specific design and materials used. Here are some common terms and their uses:

1. Bead Cap
 • Description: A small decorative component that sits at the top of a bead or gemstone on the stem of the earring.
 • Purpose: Often used to enhance the look of the bead and add a finished, ornamental touch to the earring.
 • Common Use: Found in beaded earrings, where the bead cap decorates the stem and secures the bead.
2. Dangle
 • Description: A hanging element attached to the stem, typically a small charm, bead, or other decorative piece that moves freely.
 • Purpose: Adds motion and interest to the design.
 • Common Use: Seen in drop earrings, where a small dangle or charm is attached to the stem to hang below the main earring body.
3. Charm
 • Description: A small decorative object, such as a tiny pendant, bead, or trinket, that hangs from or is attached to the stem.
 • Purpose: Personalizes the earring and adds a thematic or aesthetic detail.
 • Common Use: Charm earrings often have multiple small items dangling from the stem, giving a playful or customized look.
4. Embellishment
 • Description: A general term for any additional decorative feature added to the stem of the earring.
 • Purpose: To enhance the visual appeal of the earring.
 • Common Use: Can refer to anything from small beads to crystals or other materials that are glued, wrapped, or attached to the stem.
5. Coiling or Wrapping
 • Description: Sometimes, the stem itself may be decorated by coiling or wrapping fine wire around it.
 • Purpose: Adds texture and visual interest to the stem.
 • Common Use: Used in wire-wrapped earrings or boho-style jewelry, where the stem is wrapped in wire or thread to create a more intricate design.

Summary:
 • If you add beads or charms to the stem, it’s typically referred to as a dangle or charm.
 • If you’re decorating the stem with wire or coils, it’s usually called coiling or wrapping.
 • If you’re using a small decorative cap or fitting for a bead, it’s known as a bead cap.

Question 8

What is a fishhook on an earring?

Accepted Answer

A fishhook is a simple, thin wire that is curved into a hook shape resembling a fishing hook. It is placed through the ear to hold the earring in place.

Design Features:
 • Typically lightweight and elongated with a smooth curve.
 • No additional closure or latch; it relies on gravity to stay in place.
 • Sometimes comes with a small silicone stopper to prevent slipping.

Style:
Common in dangle or drop earrings.
Appearance:
The hook is more delicate and minimal, often less curved than a shepherd’s hook.

Question 9

What is a wrapped hook on earrings?

Accepted Answer

In earring hardware, a hook with wrappings is typically referred to as a “wrapped hook” or “wrapped ear wire.”

Description:
Wrapped Hook (or Wrapped Ear Wire): This refers to an earring hook (such as a fishhook or shepherd’s hook) that has been decorated with wire wraps or coils around the base or along the stem of the hook.

Design Features:
 • The wire wrapping is often done for decorative purposes, adding texture and a handmade, artisan look.
 • The wrapping can be simple, like a few coils, or more intricate with multiple wraps around the hook.
 • Sometimes, beads or small gemstones are added to the wraps for additional embellishment.
Common Uses:
 • Artisan Jewelry: These wrapped hooks are popular in handmade or artisan jewelry, where the wrapping technique adds an organic, custom feel.
 • Style: Used in dangle or drop earrings to create a more detailed and visually interesting hook, often paired with natural stones, crystals, or beads.

Summary:
A wrapped hook or wrapped ear wire refers to an earring hook that has wire wrapped around it for both aesthetic and structural purposes. The wrapping can vary in style, from simple coils to more elaborate designs, giving the hook a more decorative and personalized appearance.

Question 10

What is a marquise shape?

Accepted Answer

• Description: Commonly used in jewelry, it resembles an elongated oval with pointed ends, like the marquise diamond cut.
 • Features: Symmetrical, with smooth curves and sharp tips at both ends.

Question 11

What sheens are used in jewelry?

Accepted Answer

1. Glossy Finishes
 • Glossy: A highly reflective and shiny surface, often used to create a polished and vibrant look.
 • High-Gloss: An extremely reflective finish with a mirror-like quality.
 • Lustrous: Suggests a soft, radiant glow, often associated with materials like silk or polished metals.
2. Matte Finishes
 • Matte: A non-reflective surface that absorbs light, giving a smooth and subdued appearance.
 • Flat: Similar to matte but with an even lower degree of light reflection, often used in wall painting or large-scale works.
3. Satin Finishes
 • Satin: A finish that falls between matte and glossy, offering a soft, smooth sheen without being overly reflective.
 • Eggshell: A very subtle sheen, slightly more reflective than matte, named after the surface of an eggshell.
4. Metallic Sheens
 • Metallic: A reflective finish that mimics the appearance of metals like gold, silver, or bronze.
 • Pearlescent: A soft, shimmering effect that resembles the iridescence of pearls.
 • Iridescent: A sheen that shifts in color depending on the angle of light, often creating a rainbow-like effect.
 • Chrome: A high-shine metallic finish with a mirror-like surface.
5. Specialty Sheens
 • Gloss-Matte Contrast: A combination of glossy and matte finishes to emphasize certain areas.
 • Textured Sheen: A finish that combines sheen with a tactile surface, such as brushstrokes or patterns.
 • Opalescent: A finish with a subtle, translucent glow, similar to opal.
 • Velvety: A soft, slightly reflective finish that evokes the texture of velvet.

These sheen names are used in various art forms, from painting to sculpture and design, to describe and achieve different visual effects.

Frequently Asked Questions